Got a tough flow problem? Bring it to OTC 2009 and let McCrometer perform a Free Flow Evaluation. Visit us in Pavilion Booth 8127, May 4-7, at Reliant Center, Houston, Texas.
Free gift with complete flow evaluation form
Complete and deliver this Flow
Evaluation Form to OTC booth 8127. We’ll chat with you about your application, answer any flow measurement questions and give you the free gift (while supplies last).*
Not attending OTC?
Can’t take the time to visit OTC? No problem: Take a few minutes to complete our Flow
Evaluation Form now. One of our flow experts will contact you to discuss your application.
Visit McCrometer at OTC 2009, Booth 8127,
Reliant Park, Houston, Texas
* Must attend OTC 2009 and visit McCrometer
booth. No purchase necessary. |
|
 |
1 Testing to API 22.2 confirms V-Cone
performance
2 Space
Saver: Needs only 0-3 diameters
upstream, 0-1 downstream
3 Rugged no-moving parts technology
requires virtually no maintenance
4 Built-in flow conditioning for
high accuracy
up to ±0.5%
of flow rate
The space saver flow
meter solution
In
crowded FPSO environments, the compact V-Cone’s
no-moving parts design provides built-in flow conditioning, which
nearly eliminates the upstream / downstream pipe runs required by
nearly all other flow meter technologies. The V-Cone reduces flow
meter straight pipe runs by up to 70 percent or more and needs only
0-3 straight pipe diameters upstream and 0-1 downstream to operate
effectively. The V-Cone operates a wide 10:1 flow range and supports
line sizes from 0.5 to 120 inches.
 Get
a free Oil & Gas Flow Meter
Guide
on CD |
|
|
 McCrometer’s
V-Cone
Wet Gas Flow Meter is ideal for the Sub-Sea Production environment.
It relies on advanced differential pressure flow technology designed
with built-in flow conditioning to achieve an accuracy of ±0.5%,
with a repeatability of ±0.1%. It operates over a flow range of 10:1,
and comes in line sizes from 0.5 to 120 inches. It can be installed
virtually anywhere in a piping system or be easily retrofit into an
existing piping layout where flow measurement is needed.
Get
a free Oil & Gas Flow Meter
Guide on CD
 Testing
of the V-Cone Flow Meter now conforms with API 22.2. This rugged flow
meter features a no-moving parts design that requires almost no recalibration
or service, offering years of service. Unlike traditional DP instruments such
as orifice plates and venturi tubes, the V-Cone’s design is inherently
more accurate because the flow conditioning function is built-into the basic
instrument.
Visit
the complete V-Cone product
page on our web site
Technical and product support
V-Cone
Brochure and CD Catalog
Free
Flow Evalution
Questions
and Technical Support
|
|
