McCrometer - US
Join Our Email List 1-800-220-2279 

McCrometer Firmware Updates

This page provides a comprehensive record of firmware updates for the McCrometer FlowCom, ProComm GO, and ProComm Max devices. Each update includes detailed descriptions of enhancements, affected components, and patch notes. Click on a specific product to view the improvements and fixes, and download the corresponding update package.

 

FlowCom | Version 1.0.7

Download File FlowCom-Firmware-v1.0.7
Release Date 6/20/25
Patch Notes
  • Sends totalizer values to the right of the decimal place over exact read
  • Website updated to show up to 3 places to the right of the decimal place

ProComm Go | Version 2.9

Download File ProComm-Go-Firmware-v2.9
Release Date 3/24/25
Patch Notes
  • Updated pulse total tracking
  • Updated RTC init

ProComm Max Transmitter | Version 1.5.1

Download File

ProCommMax-Transmitter-Firmware-v1.5.1

Release Date 7/23/25
Patch Notes
  • Added DFLL out of bounds interrupt tracker (both xmtr and conv).

    a. COMM.DFLLOOB can be used to check how many times the interrupt has been captured.

    b. COMM.DFLLOOBRST can be used to reset the count to zero.

  • Added diagnostic and event logging when totalizer value decrease is detected.

  • Updated how displayed lists are handled when selection is being changed.

  • Updated pulse sequence to prevent pulse stoppage issues (on reboot for example):

    a. Corrected pulse last total conversion.

    b. Pulse output now checks that channel's total value increases on update.

  •  Added proper minimum value for pulse rate to avoid potential divide by zero error.

  • AMI exact read (mode 2) now uses correctly scaled total values.

  • Special value of 999 FT/S is now passed to daughter cards to denote empty pipe state (or error).

  • Updated CONFIG.SHOW to provide more information about system settings.

ProComm Max Converter | Version 1.5.1

Download File ProCommMax-Converter-Firmware-v1.5.1
Release Date 7/23/25
Patch Notes
  • Communication reliability between Transmitter and Converter

Archived Versions

Device Version Release Date Patch Notes
ProComm Max Converter 1.4.2 4/22/25
  • Added Damping feature in menu
  • Fixed potential bug for 50Hz power frequency causing converter crash
  • Improved communication
  • Added communication with Ethernet daughter card
ProComm Max Transmitter 1.4.11 6/24/25
  • Pulse Output Improvements
  • Added COMM.ALARMCNT command, allowing the user to control when the xmtr-conv communication error alarm appears.
  • Updated how pulse output is reset after totalizer is changed via USB command.
  • Corrected AMI decimal selection.
  • Improved timeout tracking when getting initial converter data.
  • Additional improvements to initial converter data getting sequence.
ProComm Max Transmitter 1.4.2 4/22/25
  • Added Damping feature in menu
  • Fixed potential bug for 50Hz power frequency causing converter crash
  • Improved communication
  • Added communication with Ethernet daughter card